ChipFind - документация

Электронный компонент: AT76C112

Скачать:  PDF   ZIP

Document Outline

1
Features
Baseline JPEG Compression/Decompression
Image Resize Engine
16-bit YC Digital Interface for CMOS Imager Input and Display Output
Compatible with Various Types of Display Devices
SDRAM Interface Support from 16M Bits to 256M Bits
Support for all Flash Card Interfaces (Atmel DataFlash
, MMC, SD, SSFDC,
CompactFlash, Memory Stick)
USB and USART Interfaces for PC Camera Applications
4 Dedicated External Interrupts, Timer Clock Input and Wake-up Pin
Serial Interface for Controlling Camera Components
32 Pins for General-purpose I/O
Up to 2M Bytes Program Space
Support for RTOS
All Low-level Software, Application Samples are Provided
208-pin BGA Package
1.8-volt Core and 3.3-volt I/O Operation
Figure 1. Typical DSC Application Using AT76C112
MPix
AT76C112
SDRAM
SDRAM I/F
GPIO
CDS
A/D
Serial
Camera
I/F
RS232
Port
(PC)
USART
USB (PC)
USB
Digital Inputs
Control
Push Buttons
MMC/SPI/SD
SSFDC
DataFlash
Memory Stick
External
Memory I/F
Flash
Flash
SRAM
CompactFlash
Flash
Card
I/F
YC
I/F
From Imager/
To Display
High-
Performance
Digital Camera
Processor
AT76C112
Summary
Rev. 2372ASDIGICAM08/02
Note: This is a summary document. A complete document is
available under NDA. For more information, please contact your
local Atmel sales office.
2
AT76C112
2372ASDIGICAM08/02
Description
The AT76C112 is a highly integrated solution for digital camera and image playback
devices. It combines a number of functions that are required for implementing such
devices.
Image data acquisition from CMOS imagers
Image display
Image processing and image storing
Overall system management
Control of general-purpose I/O functions
Data communication
Control of user functions
On-screen display
It also provides a large number of interfaces that allow equipment manufacturers to
directly access a variety of devices that may be present in a digital camera or image
playback system.
Communication with PCs
Communication with Flash cards
Serial communication ports for controlling other devices in the system
The design is based on an ARM
microprocessor that controls the entire chip. A number
of hardware resources, controlled by ARM, perform digital imaging functions such as
JPEG coding/decoding, image resizing, and DMA access to SDRAM. All these compu-
tational-intensive functions are implemented in hardware which can be programmed
according to user specifications, thus allowing ARM to be free for other user-defined
functions.
Capabilities
Supports up to 16 megapixel CMOS imagers
Interfaces to 16- to 256-Mbit SDRAM, one or two pieces
15 frames/sec capture mode (VGA resolution)
Up to 1.5M bytes/sec read/write from/to Flash cards
2M bytes external Flash ROM for program space
2M bytes external SRAM for program/working space (optional)
Full-speed USB interface (mass storage and image class)
Maximum 80 mA current in normal operation
1 - 5 mA in standby mode
50 - 100 A current in sleep mode
Printed on recycled paper.
Atmel Corporation 2002.
Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company's standard warranty
which is detailed in Atmel's Terms and Conditions located on the Company's web site. The Company assumes no responsibility for any errors
which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does
not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted
by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel's products are not authorized for use as critical
components in life support devices or systems.
Atmel Headquarters
Atmel Operations
Corporate Headquarters
2325 Orchard Parkway
San Jose, CA 95131
TEL 1(408) 441-0311
FAX 1(408) 487-2600
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
TEL (41) 26-426-5555
FAX (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
TEL (852) 2721-9778
FAX (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
TEL (81) 3-3523-3551
FAX (81) 3-3523-7581
Memory
2325 Orchard Parkway
San Jose, CA 95131
TEL 1(408) 441-0311
FAX 1(408) 436-4314
Microcontrollers
2325 Orchard Parkway
San Jose, CA 95131
TEL 1(408) 441-0311
FAX 1(408) 436-4314
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
TEL (33) 2-40-18-18-18
FAX (33) 2-40-18-19-60
ASIC/ASSP/Smart Cards
Zone Industrielle
13106 Rousset Cedex, France
TEL (33) 4-42-53-60-00
FAX (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906
TEL 1(719) 576-3300
FAX 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
TEL (44) 1355-803-000
FAX (44) 1355-242-743
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
TEL (49) 71-31-67-0
FAX (49) 71-31-67-2340
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906
TEL 1(719) 576-3300
FAX 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
TEL (33) 4-76-58-30-00
FAX (33) 4-76-58-34-80
e-mail
literature@atmel.com
Web Site
http://www.atmel.com
2372ASDIGICAM08/02
xM
ATMEL
and DataFlash
are the registered trademarks of Atmel.
ARM
is the registered trademark of ARM, Ltd. Other terms and product names may be the trademarks
of others.