P M B 2 1 1 0
G S M D u a l b a n d T X V C O
S p e c i f i c a t i o n , V e r s i o n 1 . 1 , 2 0 0 1 - 0 7 - 3 0
W i r e l e s s C o m p o n e n t s
N e v e r s t o p t h i n k i n g .
Edition 2001-07-30
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 Mnchen, Germany
Infineon Technologies AG 2/11/02.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address
list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
W i r e l e s s C o m p o n e n t s
P M B 2 1 1 0
G S M D u a l b a n d T X V C O
S p e c i f i c a t i o n , V e r s i o n 1 . 1 , 2 0 0 1 - 0 7 - 3 0
N e v e r s t o p t h i n k i n g .
Specification
Revision History:
2001-07-30
PMB 2110
Previous Version:
May 2001
Page
(in
previous
Version)
Page
(in current
Version)
Subjects (major changes since last revision)
16 ff
AC/DC Characteristics specified vs Temperature
16/17
Max Supply current added: GSM:34mA, DCS:37mA
18
Itune max: 2nA added
5 ff
SupplyVoltage changed: 2.7V to 2.95V
For questions on technology, delivery and prices please contact the Infineon
Technologies Offices in Germany or the Infineon Technologies Companies and
Representatives worldwide: see our webpage at http://www.infineon.com
ABM
, AOP
, ARCOFI
, ARCOFI
-BA, ARCOFI
-SP, DigiTape
, EPIC
-1, EPIC
-S,
ELIC
, FALC
54, FALC
56, FALC
-E1, FALC
-LH, IDEC
, IOM
, IOM
-1, IOM
-2,
IPAT
-2, ISAC
-P, ISAC
-S, ISAC
-S TE, ISAC
-P TE, ITAC
, IWE
, MUSAC
-A,
OCTAT
-P, QUAT
-S, SICAT
, SICOFI
, SICOFI
-2, SICOFI
-4, SICOFI
-4
C,
SLICOFI
are registered trademarks of Infineon Technologies AG.
ACETM, ASMTM, ASPTM, POTSWIRETM, QuadFALCTM, SCOUTTM are trademarks of
Infineon Technologies AG.
Controller Area Network (CAN): License of Robert Bosch GmbH
Specification
5
2001-07-30
Type
Ordering Code
Package
PMB 2110
Q67034-H0005
P-TSSOP-10
GSM Dualband TX VCO
PMB 2110
Version 1.1
Product Info
P-TSSOP-10-1
General Description
s
The PMB 2110 is a Transmit VCO for
Dualband (900/1800) GSM mobiles.
Features
s
Fully integrated, monolithic solution
s
Very small outline and low profile
TSSOP10 package
s
Two single ended RF power outputs to
drive the power amplifier
s
Low power balanced output for PLL
downconverter for optimized bill of
material (no external power splitter
required)
s
Band select and power down function
s
Supply voltage range 2.7V to 2.95V
s
-20C to +75C operational tempera-
ture range
Application
s
Transmit VCO for GSM Dualband
(900/1800) transceivers
PDF 
ZIP