Copyright
2003 ITE, Inc.
This is Preliminary document release. All specifications are subject to change without notice.
The material contained in this document supersedes all previous documentation issued for the related
products included herein. Please contact ITE, Inc. for the latest document(s).
All sales are subject to ITE's Standard Terms and Conditions, a copy of which is included in the back of this
document.
ITE, IT8712F is a trademark of ITE, Inc.
Intel is claimed as a trademark by Intel Corp.
Microsoft and Windows are claimed as trademarks by Microsoft Corporation.
PCI
is claimed as a trademark by the PCI Special Interest Group.
IrDA is claimed as a trademark by the Infrared Data Association.
All other trademarks are claimed by their respective owners.
All specifications are subject to change without notice.
Additional copies of this manual or other ITE literature may be obtained from:
ITE,
Inc.
Phone: (02)
29126889
Marketing
Department
Fax:
(02) 2910-2551, 2910-2552
8F, No. 233-1, Bao Chiao RD., Hsin Tien,
Taipei County 231, Taiwan, R.O.C.
ITE (USA) Inc.
Phone: (408)
530-8860
Marketing
Department
Fax: (408)
530-8861
1235 Midas Way
Sunnyvale, CA 94086
U.S.A.
ITE (USA) Inc.
Phone: (512)
388-7880
Eastern U.S.A. Sales Office
Fax: (512)
388-3108
896 Summit St., #105
Round Rock, TX 78664
U.S.A.
If you have any marketing or sales questions, please contact:
Lawrence Liu, at ITE Taiwan: E-mail: lawrence.liu@ite.com.tw, Tel: 886-2-29126889 X6071,
Fax: 886-2-29102551
David Lin, at ITE U.S.A: E-mail: david.lin@iteusa.com, Tel: (408) 530-8860 X238,
Fax: (408) 530-8861
Don Gardenhire, at ITE Eastern USA Office: E-mail: don.gardenhire@iteusa.com,
Tel: (512) 388-7880, Fax: (512) 388-3108
To find out more about ITE, visit our World Wide Web at:
http://www.iteusa.com
http://www.ite.com.tw
Or e-mail itesupport@ite.com.tw for more product information/services.
www.ite.com.tw
IT8712F V0.7
1
Revision History
Revision History
Section
Revision
Page No.
The signals of pin 1, 13, 30, 31, 32, 33, 34,71, 77, 78, 79, 84 and 85
have been revised.
7
4
In table 4-1, pin 71,77 and 79 were revised.
8
The signals and descriptions of pins 1, 13, 30, 31, 32, 33, 34,71, 77, 78,
79, 84 and 85 have been revised.
9
5
In table 5-15, pin 71,77 and 79 were revised.
19
The signals of pins 1, 13, 30, 31, 32, 33, 34,71, 77, 78, 79, 84, and 85
have been revised.
21
6
In table 6-4 and 6-5, pin 71,77 and 79 were revised.
22
7
Added JP4 description to Table 7-1. Power On Strapping Options.
The Figure 7-1 has been revised.
23
Added Enhanced Multi-Function Pin Selection Register (Index = 2Ah)
and Logical Block Configuration Lock Register (Index = 2Bh) to Table
8-1. Global Configuration Registers.
26
Added VID Input Register (Index = FCh) and VID Output Register (Index
= FDh) to Table 8-10. GPIO Configuration Registers.
30
In the last two rows of table 8-10, VID Reading Register was changed
into VID Input Register and VID Control Register was changed into VID
Output Register.
30
Added the description of bit 7-6 XLOCK Select to section 8.3.6 Clock
Selection Register.
In section 8.3.6, the description of bit 4 was revised.
33
The descriptions of bit 5-0 in section 8.3.8 have been revised.
34
The descriptions of bit 5,1 and 0 in section 8.3.11 have been revised.
36
The descriptions of bit 5 and 3 in section 8.3.12 have been revised.
36
Added Index 2Ah description to section 8.3.13 Extended Multi-Function
Pin Selection Register.
37
Added Index 2Bh description to section 8.3.14 Logical Block Lock
Register.
38
The description of bit 2 in section 8.5.7 Serial Port 1 Special
Configuration Register 3 has been revised.
42
The description of bit 7 in section 8.5.8 Serial Port 1 Special
Configuration Register 4 has been revised.
42
The description of bit 2 in section 8.6.7 Serial Port 2 Special
Configuration Register 3 has been revised.
44
8
The description of bit 7 in section 8.6.8 Serial Port 2 Special
Configuration Register 4 has been revised.
44
PDF 
ZIP
