ii
Electromagnetic Compatibility Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded cables for SCSI connection external to the cabinet are used in the compliance testing of this Product. LSI
Logic is not responsible for any radio or television interference caused by unauthorized modification of this equipment
or the substitution or attachment of connecting cables and equipment other than those specified by LSI Logic. The
correction of interferences caused by such unauthorized modification, substitution, or attachment will be the
responsibility of the user.
The LSI Logic LSI40909G-S is tested to comply with FCC standards for home or office use.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du
Canada.
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may
cause radio interference. Install and use the equipment according to the instruction manual.
LSI Logic Corporation
North American Headquarters
Milpitas, CA
408.433.8000
iii
This document contains proprietary information of LSI Logic Corporation. The
information contained herein is not to be used by or disclosed to third parties
without the express written permission of an officer of LSI Logic Corporation.
LSI Logic products are not intended for use in life-support appliances, devices,
or systems. Use of any LSI Logic product in such applications without written
consent of the appropriate LSI Logic officer is prohibited.
Document DB14-000180-00, First Edition (February 2001).
This document describes the LSI Logic LSI40909G-S PCI to Fibre Channel Host
Adapter for Sun Solaris and will remain the official reference source for all
revisions/releases of this product until rescinded by an update.
To receive product literature, visit us at http://www.lsilogic.com.
LSI Logic Corporation reserves the right to make changes to any products herein
at any time without notice. LSI Logic does not assume any responsibility or
liability arising out of the application or use of any product described herein,
except as expressly agreed to in writing by LSI Logic; nor does the purchase or
use of a product from LSI Logic convey a license under any patent rights,
copyrights, trademark rights, or any other of the intellectual property rights of
LSI Logic or third parties.
Copyright 2001 by LSI Logic Corporation. All rights reserved.
TRADEMARK ACKNOWLEDGMENT
The LSI Logic logo design, MetaStor, and Fusion-MPT are registered trademarks
or trademarks of LSI Logic Corporation. Sun and Solaris are trademarks or
registered trademarks of Sun Microsystems, Inc. All other brand and product
names may be trademarks of their respective companies.
DB
Preface
v
Preface
This book is the primary reference and user's guide for the LSI Logic
LSI40909G-S PCI to Fibre Channel Host Adapter for Sun Solaris board.
It contains a complete functional description for the LSI40909G-S as well
as complete physical and electrical specifications.
Audience
This document assumes that you have some familiarity with Fibre
Channel protocol and related support devices and will benefit persons
installing and using the LSI40909G-S.
Organization
This document has the following chapters and appendix:
Chapter 1, LSI40909G-S Description
, defines the interfaces and
characteristics of the LSI40909G-S.
Chapter 2, Installing the LSI40909G-S
, provides both quick and
detailed installation instructions.
Chapter 3, Software Installation,
describes the installation
procedures for the Fusion-MPT and Fibre Channel drivers.
Chapter 4, LSI40909G-S Technical Characteristics,
describes the
physical and operational environments of the LSI40909G-S.
Appendix A, Glossary of Terms and Abbreviations
, provides
definitions of various terminology that is referenced throughout this
user's guide.
PDF 
ZIP
