1 of 1
090302
FEATURES
Programs EEPROM to set frequency and
operating modes
Supports Dallas Programmable Oscillator
family
DS1075
DS1075-IND
DS1073
DS1065
Operates with a PC-compatible host system
Easy Windows installation (Win95 or higher)
Demonstrates
ease of programming frequency changes
through the prescaler and divider
reference choices, internal-external-crystal
oscillator
power-down mode
output enable/disable
Kit Contents
1. 1 pc. Program/Evaluation PC board
2. 1 pc. 3.5 floppy disk with Software
3. Samples (300mil DIP)
2 DS1075M-060
2 DS1075M-066
2 DS1075M-080
2 DS1075M-100
DS1075 Programming/Evaluation Kit
Equipment Needed
To use the DS1075K, you will need:
1. An IBM-compatible PC running Microsoft
windows 95 with a 3.5 floppy drive and an
available serial port
2. A 5V power supply with suitable connectors
to fit the banana jacks on the PC Board
3. A RS232 cable with DB25 connector to
connect from the PC serial port to the kit
DESCRIPTION
The DS1075K programming/evaluation kit makes programming and performance evaluation of the
Dallas oscillator product line easy. It contains everything needed to program the Dallas programmable
oscillators; with this kit the user can change the register setting that controls the mode of operation and
the divide-by number for the selection of output frequency desired.
The kit makes programming as easy and fast as a "click of the mouse," and you have changed the
EEPROM register setting that controls the frequency selection and operation mode. Programming of 8-
pin DIP part is supported in the kit. An SO socket (ENPLAS OTS-8) is required to program 8-pin SO
parts.
For more information contact:
Application Support (972) 371-4289 or fax (972) 371-4799
Marketing Support (972) 371-6001
DS1075K
Oscillator Programming/
Evaluation Kit
www.maxim-ic.com
PDF 
ZIP