221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-Mail - sales@sensitron.com
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 295, REV. B
HERMETIC POWER SCHOTTKY RECTIFIER
Ultra Low Reverse Leakage
DESCRIPTION: 100 VOLT, 60 AMP, HERMETIC POWER SCHOTTKY RECTIFIERS IN A SHD-2/2B
PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ T
C
= 25
C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PEAK INVERSE VOLTAGE
PIV
100
Volts
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @
T
C
= 100
O
C)
I
O
60
Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(t = 8.3ms, Sine)
I
FSM
860
Amps
MAXIMUM JUNCTION CAPACITANCE (V
r
=5V) C
T
1500
pF
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode)
R
JC
0.35
C/W
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
Top/Tstg
-65 to
+200
C
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
SYMBOL
MAX.
UNITS
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (I
f
= 60 Amps)
T
J
= 25
C
T
J
= 125
C
V
f
0.87
0.72
Volts
MAXIMUM REVERSE CURRENT (I
r
@ 100 V PIV)
T
J
= 25
C
T
J
= 125
C
I
r
0.03
3.0
mA
SHD115534
SHD115534B
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-Mail - sales@sensitron.com
SENSITRON
DATA SHEET 295, REV. B
MECHANICAL DIMENSIONS: In Inches / mm
Curves are for die only
SHD115534
SHD115534B
SHD-2 SHD-2B
0.
0.
0.
0.
0.
0.
0.
0.
Forward Voltage Drop - V
F
1
-2
1
-1
1
0
1
1
1
2
Instantaneous Forward Current - I
F
Typical Forward Characteristics
125
200
175
25
0
2
4
6
8
10
12
Reverse Voltage - V
R
1
-4
1
-3
1
-2
1
-1
1
0
1
1
1
2
Instantaneous Reverse Current - I
R
Typical Reverse Characteristics
25
50
75
100
125
150
200
175
0
2
4
6
8
10
12
Reverse Voltage - V
R
20
40
60
80
100
120
140
Junction Capacitance - C
T
Typical Junction Capacitance
.075 (1.91) Max
.315.010
(8.00.254)
Moly Lid
Moly Base
.315.010
(8.00.254)
Alumina Ring
.090 (2.29) Max
Alumina Ring
Moly Base
(Cathode)
.060.010
(1.52.254)
.015.002
(.381.051)
.020.005 R
(.508.127 )
.315.010
(8.00.254)
.150.010
(3.81.254)
.465.020
(11.8.508)
.315.010
(8.00.254)
.015.005
(.381.127)
Copper Anode
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-Mail - sales@sensitron.com
SENSITRON
TECHNICAL DATA
DATA SHEET 295, REV. B
SHD115534
SHD115534B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users'
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
PDF 
ZIP