| mili lee | The rated output power of TP03AL series is 3W with wide input voltage range, for both AC input and DC input application. High reliability, Low power consumption, safety isolation .Widely used in industrial control and electrical instrumentation, smart home, which do not have high requirement on EMC. The EMC external circuit must be added if the products need to be applied to EMC harsh environment.
Universal input voltage range Both for AC and DC input voltage Low Ripple &Noise High efficiency, high power density, miniature dimensions Low power consumption 30mW Overheat protection ,Over current protection International standard Footprint&Pinouts Industrial product design Operating temperature : -40 to 70
SELECTION GUIDE
Part Number Input Voltage Output Efficiency (Typ. )
%
Voltage VAC) Voltage VDC) CurrentA |
| | The rated output power of TPC/LR-35-XS series is 35-38.4Winput voltage range90-264VAC,
output voltage : 5V,12V,15V,24V,36V,48V,High reliability, precision,effificency , ultra-small size,
no external heat sink required, stable output voltage and etc, with short circuit, overload protection,
Widely used in telecommunications, industrial control, instrumentmation, data acquisition, signal control , New Energy, Security,and other electronic systems.
AC input 90VAC-264VAC 100% full load burn-in test short circuit, overload,over-voltage protection
Operating temperature-30~70
RoHS complaint Low standby power consumption<0.5W
|
| | 50W 1.5KVDC Isolated Wide Input Voltage DC/DC Converters
The rated output power of TP50DG converters is 50W,the outline dimensions is "57.9*36.8*12.7"or "57.9*61*12.7, 2:1 input voltage range ,the voltage range is 9V-18V,18V-36V,36V-72V.The accuracy of the converter can reach ±1%,it can be widely used in telecommunications, railway transportation, instrument and etc.
Part Number Input Voltage Output Capacity Ability (uF) Efficiency < /pre>
Typ.(%)
voltageVDC) VoltageVDC) CurrentA Rated Range values TP50DG110S05 110(2:1) 66-160 5 10 6800 87 TP50DG110S12 110(2:1) 66-160 12 4.15 2700 88 TP50DG110S15 110(2:1) 66-160 15 3.35 2200 88 |
| | The rated output power of TPC/LR-350-XS series is 350Winput voltage range90-264VAC,
output voltage : 12V,24V. High reliability, precision,effificency ,no external heat sink required,
stable output voltage and etc, with short circuit, over-load,over-voltage protection,
Widely used in telecommunications, industrial control, instrument, data acquisition,
signal control , New Energy, Security,and other electronic systems.
AC input 90~132VAC / 180~264VAC
100% full load burn-in test short circuit, over-load,over-voltage protection
Operating temperature-25~70 |
| | 0.5W 3KVDC Isolated SMD DC/DC Converters TPET-W5 integrated circuit
Miniature surface mounted DC/DC Converters are an ideal and economical solution for many applications
where noise reduction, voltage isolation, voltage conversion in distributed power systems is required.
these converters are qualified for the higher temperatures requested by lead-free reflow solder processes,
especially for automated SMD production lines.
Part Number Nominal Input Voltage Output Voltage V V TPET0303-W5 3.3 3.3 TPET0305-W5 3.3 5 TPET03 09-W5 3.3 9 |
| | Miniature surface mounted DC/DC Converters are an ideal and economical solution for many applications where noise reduction, voltage isolation, voltage conversion in distributed power systems is required. these converters are qualified for the higher temperatures requested by lead-free reflow solder processes, especially for automated SMD production lines.
Part Number Nominal Input Voltage Output Voltage Output Current (Max./Min) Efficiency V V mA % TPET0505-2W 5 5 400/40 75
TPET 0509-2W 5 9 222/22 78
|
| | The rated output power of TP10DC converters is 10W,the outline dimensions is "50.8*25.4*11.75", 2:1 and 4:1 wide input voltage range, the voltage range is 9V-18V,18V-36V,36V-72V,9V-36V and 18V-72VDC.The accuracy of the converter can reach ±1%,it can be widely used in telecommunications, railway transportation, instrument and etc.
10W output power 2:1&4:1 input voltage range Over load protection
50.8mm*25.4mm*11. 2mm standard package
Fixed switching frequency Over voltage protection
Metal shielding package
RoHS compliant Operating temperature: -40to 85C
SELECTION GUIDE
Part Number Input Voltage Output Efficiency(Typ)
|
| | TP78XX-2 series switching regulators are ideal replacement for TP78xx linear regulators and LDOs. The efficiency of up to 92% means that very little energy is wasted as heat so there is no need for any heat sinks with their additional space and mounting costs. They are widely used in industrial control, instrumentation, and electric power applications.
ROHS Compliant Wide input non-isolatedregulated single output Efficiency up to 93% Short circuit protection, Thermal shutdown Temperature range: -40C ~ +85C Low ripple noise SIP package No heat sink required Industry standard pinout
SELECTION GUIDE
Part Number Input Voltage (VDC) Output Efficiency% Nominal Range VoltageVDC) CurrentmA) Vin (Min) Vin(Max) |
| | The rated output power of TP40DG converters is 40W,the outline dimensions is "50.8*50.8*11.2",
2:1 input voltage range ,the voltage range is 9V-18V,18V-36V,36V-72V.
The accuracy of the converter can reach ±1%,it can be widely used in telecommunications,
railway transportation, instrument and etc.
Part Number Input Voltage Output voltageVDC) VoltageVDC) Rated Range values TP40DG12S03 12(2:1) 9-18 3.3 TP40DG12S05 12(2:1) 9-18 5 |
| | The rated output power of TP12DC converters is 12W,the outline dimensions is "50.8*25.4*12.2", 2:1 and 4:1 wide input voltage range,
the voltage range is 9V-18V,18V-36V,36V-72V,9V-36V and 18V-72VDC.
The accuracy of the converter can reach ±1%,it can be widely used in telecommunications, railway transportation, instrument and etc.
Part Number Input Voltage Output voltageVDC) VoltageVDC) Rated Range values TP12DC12S03 12(2:1) 9-18 3.3 TP12DC12S05 12(2:1) 9-18 5 TP12 DC12S12 12(2:1) 9-18 12 TP12DC12S15 12(2:1) 9-18 15 |
| | 1W SIP7 unregulated 3KVDC isolated DC/DC converters
5VDC input with 5VDC output
case size:19.5*6*10mm
TPR0505S-1W is the replacement of TMA0505S/IV0505SA/B0505LS-1W
TPR1224S-1W=B1224LS-1W
if any inquiry about PCB mountable converters ,welcome check with us.
We could replace: MurataPS, Recom, TRACO,Aimtec
CUI ,Minmax,Meanwell,XP power,etc,. |
| | The rated output power of TPC/MF-60-XS series is 60Winput voltage range90-265VAC, output voltage : 12V,15V,24V,18V,36V ,High reliability, precision,effificency , ultra-small size, no external heat sink required, stable output voltage and etc, with short circuit, overload protection, Widely used in instrument, telecommunications, industrial control, data acquisition, signal control , New Energy, Security,and other electronic systems.
AC input 90VAC-265VAC overload,over-temperature protection Operating temperature-40~70
< pre>RoHS complaint High reliability,effificency Isolation voltage:4KV
No load Consumption 0.3W
Part Number Input Output Efficiency @25, Typ% Ripple
(mV)
Volatg eVAC) VoltageVDC) Rated currentA |
| | The rated output power of TPC/PDF-600-XS series is 600Winput voltage range90-264VAC, output voltage:12V,24V,48V,High reliability, precision,effificency , ultra-small size, no external heat sink required, stable output voltage and etc, with over current protection, short circuit, overload protection, Widely used in telecommunications, industrial control, instrument, data acquisition, signal control , New Energy, Security,and other electronic systems.
AC input 90VAC-264VAC short circuit, overload,over-voltage protection Operating temperature-20~70 RoHS complaint High reliability,effificency Built-in active PFC function, PF>0.95
capacitors
Altitude up to 5000m
PCB soldering side with conformal coating 1 U low profile,40.7mm
SELECTION GUIDE |
| | TPK0305SA 2W SIP DC/DC converters 3.3Vin 5Vout
Part Number Nominal Input Voltage Output Voltage V V TPK0305SA 3.3 5 TPK0505SA 5 5 TPK0509SA 5 9< /pre>
TPK0512SA 5 12 TPK0515SA 5 15 TPK1205SA 12 5 |
| | Universal input voltage range Both for AC and DC input voltage Wide input voltage: 4:1 Fixed switching frequency Overheat protection Over current protection Short circuit protection RoHS compliant Operating temperature :-25 to 70 Part Number Input Voltage Output Efficiency (Typ. )
%
Range values VoltageVDC) CurrentA (VAC) (VDC) TP07AC220S05W 85-265 110-370 5 1.4 69< /pre>
TP07AC220S06W 85-265 110-370 6 1.16 69 TP07AC220S09W 85-265 110-370 9 0.77 73< /pre> |
| | The rated output power of TP15DU converters is 15W ,
it is 100-1000VDC super wide input voltage rangeHigh Efficiency ,High reliability DC/DC switch power supply
can be widely used in photovoltaic power generation and high frequency inverter and other occasions
provide a stable working voltage for the load equipments,
And its built-in multiple protection function can improve the module power supply & Load safety performance under abnormal circumstances .
Operating temperature : -40C to 85C High Efficiency, Low Ripple and noise Output overload&short circuit protection
100-1000VDC super wide input voltage range Both for AC and DC input voltage Industrial,military-Level product design Designed for photovoltaic power generation, wind power and other ancillary equipment
Part Number Input Voltage Output Efficiency
(Typ)
|
| | The rated output power of TPC/PD-15-XS series is 15Winput voltage range90-264VAC,
output voltage : 3.3V,5V,12V,15V ,24V. High reliability, precision,effificency , ultra-small size,
with short circuit, over-load,over-voltage protection,Widely used in telecommunications,
industrial control, instrument,data acquisition,signal control , New Energy,
Security,and other electronic systems.
AC input 90VAC-264VAC 100% full load burn-in test short circuit, overload,over-voltage protection
Operating temperature-20~70
RoHS complaint Low standby power consumption<0.5W
|
| | The rated output power of TP15DC converters is 15W,the outline dimensions is "50.8*25.4*12.2", 2:1 input voltage range,the voltage range is 9V-18V,18V-36V,36V-72V.The accuracy of the converter can reach ±1%,it can be widely used in telecommunications,railway transportation, instrument and etc.
15W output power 2:1 input voltage range Under input voltage protection
50.8mm*25.4mm*12. 2mm standard package
Fixed switching frequency Over output voltage protection Operating temperature: -40to 85 Long-term short circuit protection Metal shielding package RoHS compliant / /
SELECTION GUIDE
Part Number Input Voltage Output Efficiency(Typ)
|
| | 1W 6KVDC Isolated Single and Dual Output DC/DC Converters
The TPJ series are miniature, 6KVDC isolated 1 W DC/DC-converters in a SIP package with single and dual output voltage. They offer the ideal solution in many space critical applications for board level power distribution. The internal SMD construction makes it possible to offer a product with high performance at low cost. The series offers smaller size, improved efficiency, lower output ripple noise.
RoHS compliantCE certification Single and dual outputs Power density 0.42w/cm3 Operating temperature: -40C to 105C Footprint 1.91cm2 UL 94V-0 package material No heatsink required 6KVDC isolation SIP package style Input voltage: 3.3V,5V,12V,15V,24V Output voltage:±5V, ±9V,±12V,±15V / 3.3V, 5V,9V,12V,15V,24V Custom solutions available
Part Number Nominal Input Voltage Output Voltage |
| | Functional Specification:
1 Model NO.: TKE Series
2 Power(Watts): 1W
3 Isolation Voltage: 3KVDC
4 Package: DIP / SIP
5 Input(VDC): 3.3V, 5V, 12V
6 Output(VDC): 3.3V, 5V, 9V, 12V,15V
7 Temperature: -40C to 85C
8.1 Dimensions (mm): DIP(L/W/H): 11.5*9.8*5.4
8.2 Dimensions (mm): SIP(L/W/H): 11.48*6*7.46 |
|
|
Статистика доски
Mail-list корректор
Подписка на RSS-поток